6130 Series Spare Parts

6130 SERIES SPARE OR REPLACEMENT PARTS:
.
WARNING NOTICE:   The purchase has the responsibility to ensure that the presence sensing device is properly installed. Before operating any protected equipment it must be determined that the machine can stop in less time than it takes for an operator to interrupt the light curtain and reach a danger point per OSHA Standard 1910.217 distance formula. If the light curtain does not protect all accesses to the danger point, The unprotective area must be guarded by other approved devices or means in accordance with OSHA 1910.217 and ANSI B 11.1 (section2). Do Not use this device on a full revolution clutch press or machine which does not incorporate a part rev braking system.
.
.
(Standard Control Box)

(OLP#-96)...CB-1321-AS                                         Standard 6120/6130 Light Curtain Control Box.
(OLP#-97)...RY-1897-AS                                         Captive Contact Safety Control Relay.
(OLP#-98)...RY-1946-AS                                        Old Safety Control Relay LY2 Type.
(OLP#-99)...FZ-1898-AS                                          Power Fuse 250v, 2 Amp.

(Blanking Control Box)

(OLP#-100)...CB-1322-AS                                       Blanking series 6120/6130 Light Curtain Control Box.
(OLP#-101)...BC-1323-AS                                       Additional Blanking Control Card (gray control box model).
(OLP#-102)...BC-1874-AS                                       Additional Blanking Control Card (orange control box model).
(OLP#-97).....RY-1897-AS                                       Captive Contact Safety Control Relay.
(OLP#-98).....RY-1946-AS                                       Old Safety Control Relay LY2 Type.
(OLP#-99).....FZ-1898-AS                                        Power Fuse 250v, 2 Amp.
(OLP#-103)...KY-1845-AS                                       Blanking Control Box Door Key Assembly.

(Projector & Receiver units)

NOTE: These items are separately sold units. Each unit comes standard with a quick cable disconnect feature. If your item you selected is to replace an existing light curtain unit that does not have a quick cable disconnect feature you will need to purchase a corresponding projector or receiver cable to match you new unit. Refer to 6130 projector and receiver cables.

(OLP#-191)...6130-2180-12P              12 inch Projector unit        Projector unit only requires connection cable & Hardware
(OLP#-192)...6130-2188-12R              12 inch Receiver unit         Receiver unit only requires connection cable & Hardware

(OLP#-193)...6130-2181-18P              18 inch Projector unit        Projector unit only requires connection cable & Hardware
(OLP#-194)...6130-2189-18R              18 inch Receiver unit         Receiver unit only requires connection cable & Hardware

(OLP#-195)...6130-2182-24P              24 inch Projector unit         Projector unit only requires connection cable & Hardware
(OLP#-196)...6130-2190-24R              24 inch Receiver unit          Receiver unit only requires connection cable & Hardware

(OLP#-197)...6130-2183-30P              30 inch Projector unit         Projector unit only requires connection cable & Hardware
(OLP#-198)...6130-2191-30R             30 inch Receiver unit          Receiver unit only requires connection cable & Hardware

(OLP#-199)...6130-2184-36P             36 inch Projector unit          Projector unit only requires connection cable & Hardware
(OLP#-200)...6130-2192-26R             36 inch Receiver unit           Receiver unit only requires connection cable & Hardware

(OLP#-201)...6130-2185-42P             42 inch Projector unit          Projector unit only requires connection cable & Hardware
(OLP#-202)...6130-2193-42R             42 inch Receiver unit           Receiver unit only requires connection cable & Hardware

(OLP#-203)...6130-2186-48P             48 inch Projector unit           Projector unit only requires connection cable & Hardware
(OLP#-204)...6130-2194-48R             48 inch Receiver unit            Receiver unit only requires connection cable & Hardware

(OLP#-205)...6130-2187-54P             54 inch Projector unit           Projector unit only requires connection cable & Hardware
(OLP#-206)...6130-2195-54R             54 inch Receiver unit            Receiver unit only requires connection cable & Hardware

(6130 Series Projector & or Receiver Filters)

(OLP#-207)...LN-1859-AS               12 inch 6130 series projector and or receiver filter
(OLP#-208)...LN-1869-AS               18 inch 6130 series projector and or receiver filter
(OLP#-209)...LN-1861-AS               24 inch 6130 series projector and or receiver filter
(OLP#-210)...LN-1862-AS               30 inch 6130 series projector and or receiver filter
(OLP#-211)...LN-1863-AS               36 inch 6130 series projector and or receiver filter
(OLP#-212)...LN-1864-AS               42 inch 6130 series projector and or receiver filter
(OLP#-213)...LN-1865-AS               48 inch 6130 series projector and or receiver filter
(OLP#-214)...LN-1866-AS               54 inch 6130 series projector and or receiver filter

(6130 Series Projector & Receiver Connection Cables)

(OLP#-215)...CB-1871-AS              20ft - 3 Conductor projector cable with disconnect
(OLP#-216)...CB-1872-AS              20ft - 6 Conductor Receiver cable with disconnect
(OLP#-155)...CB-1984-AS              Pigtail to cable coupling

(OLP#-154)...JB-1974-AS Safety Light cable junction box

(6130 Series Rubber Gromment Isolators)

(OLP#-217)...GM-1886-AS             Rubber Isolator Projector/Receiver units top or bottom
(OLP#-145)...GM-1868-AS             Rubber Isolator kit Standard Control Box
(OLP#-146)...GM-1903-AS             Rubber Isolator kit Blanking Control Box

(6130 Series Upper and Lower end-caps and mounting brackets)

(OLP#-218)...CP-1892-AS              Safety Light Upper End Cap

(OLP#-219)...CP-1893-AS              Safety Light Lower End Cap With Hole

(OLP#-149)...MT-1902-AS             Blanking Control Box mounting plate, L-Bracket top & bottom

(OLP#-150)...MT-1904-AS             Standard Control box L-Mounting bracket

(OLP#-220)...MT-1410-AS             6130 series mounting kit includes: 1-GM-1886-AS grommet,1-CL1894-AS
                                                          Pig-tail coupling, 1-HR-4111-AS Hardware package.

(OLP#-221)...HR-4111-AS              6130 Series hardware package:
.
.
WARNING NOTICE:   The purchase has the responsibility to ensure that the presence sensing device is properly installed. Before operating any protected equipment it must be determined that the machine can stop in less time than it takes for an operator to interrupt the light curtain and reach a danger point per OSHA Standard 1910.217 distance formula. If the light curtain does not protect all accesses to the danger point, The unprotective area must be guarded by other approved devices or means in accordance with OSHA 1910.217 and ANSI B 11.1 (section2). Do Not use this device on a full revolution clutch press or machine which does not incorporate a part rev braking system.
.

** Remember your part number you will need it when you check-out! Click her to purchase

6120 Safety Lights 6130 Safety Lights 9020 Press Controls Press Control Up-Grades PMD Die Protection

6120 Series Light Curtain Parts 6130 Series Light Curtain Parts Brake Monitors RF Sensing Unit AutoMic Die Protection