PMD System

PMD PROGRAMMABLE MONITORING DEVICE
SIX STATION DIE PROTECTION SYSTEM WITH PROGRAMMABLE TIMING WINDOWS

PD-1633-AS

WARNING:: THIS UNIT CAN NOT BE USED IN CONJUNCTION WITH ANY FORM OF PERSONAL SAFETY DETECTION

GENERAL DESCRIPTION:

The PMD unit incorporates the latest advances in microprocessor technology and is designed to prevent costly die damage due to improper part ejection, die overload, misfeed and other malfunctions of automatic press operations.

The PMD has 6 channel capability, each with the ability to program one of 5 functions. Two different timing windows can be internally generated by inputting a single main timer switch sugnal. These windows are programmed in degrees of crank rotation. (Example: on at 270 degrees off at 90 degrees).

Other important features include a timer failsafe circuit, preset parts counter, a batch counter, a counter aux. relay for automation control and a S.P.M (Stroke0Per-Minute) monitor with display. The PMD is also equipped with a 12Vdc low voltage power supply for use with low voltage in-die sensors. All station inputs are connected directly to the face of the PMD or can be connected to an optional sensor interface disconnect block QD-1745-AS .

The optional sensor block is an eight station die protection sensor quick-disconnect block. This unit incorporates a separate input for each channel on the PMD, the block also will supply low voltage from the PMD to the die sensors.

                          BENNEFITS:                                                             FEATURES:

                    Increase operating speeds                                          Microprocessor Design
                    Improves labor utilization                                             Failsafe timer circuit
                    Increase die life                                                           Two Programmable timing circuits
                    Reduces die damage and breakage                              Flexible 6 channel with 5 functions
                    Minimizes down time from bad hits                              Built-in low voltage power supply
                    Reduces scrap                                                            Operating speeds to 1500 SPM
                    Increase profits                                                           Programmable parts and batch counters
                    Improves scheduling                                                   SPM- Stroke per minute digital display

PMD DIE PROTECTION UNIT:

(OLP#-10)...PD-1633-AS:..................6 channel die protection system. Includes the following.

                                                        (1) PD-1633-AS Base unit, (2) CB-1884-AS Sensor
                                                        cables, (1) BR-1878-AS Base unit L-Bracket, (1) set
                                                        GM-6275-AS Vibration mounting legs, (6) BP-4134-AS
                                                        Signal input banana jacks and (1) MN-1919-AS User
                                                        Installation / Programming manual.

SPARE OR REPLACEMENT PARTS:

(OLP#-11)...CB-1884-AS: ...................Sensor cable with B&K Connector

(OLP#-12)...BR-1878-AS:....................Base unit mounting L-Bracket

(OLP#-13)...GM-6275-AS:...................Isolator vibration mounting grommets

(OLP#-14)...BP-4134-AS: ....................Sensor Input Banana Jacks

(OLP#-15)...MN-1919-AS:...................User / Installation / Programming manual.

(OLP#-16)...QD-1745-AS:....................Optional sensor connection block.

** Remember your part number you will need it when you check-out! Click here to purchase

6120 Safety Lights 6130 Safety Lights 9020 Press Controls Press Control Up-Grades PMD Die Protection

6120 Series Light Curtain Parts 6130 Series Light Curtain Parts Brake Monitors RF Sensing Unit AutoMic Die Protection